BMFM114
| Mount | Beveling | Squaring | Counterboring | Flush pipes | Weld Joint | Coating Removal | Saddles | Surfacing |
| OD |
BMFM114
BMFM114 Tube and Pipe Beveling Machine
- it new generation can machine several tube diameters without changing the clamping system. Collets are not necessary
- its concentric clamping system enables a perfect preparation of tubes for manual and automatic welding
- mounted on a bench can be operated by just one operator
- can perform beveling, facing, and counter-boring operations sequentially of simultaneously
- tool-holder plate can hold up to four tool blocks
| BMFM114-1000 | for Ø 0.78"- 4.5" (20mm - 114.3mm) with pnuematic drive |
| BMFM114-1002 | for Ø0.78"- 4.5" (20mm - 114.3mm) with pnuematic drive and automatıc clamping |
| BMFM114-1004 | for Ø 0.78"- 4.5" (20mm - 114.3mm) with integrated pnuematic automatıc clamping and feed device |
| BMFM114-1022 | for Ø 0.78"- 4.5" (20mm - 114.3mm) with electric drive 220V |
| BMFM114-1040 | for Ø 0.78"- 4.5" (20mm - 114.3mm) with electric drive 110V |
Technical Features
| Machining Capacity | Standard: max. dia. 20 mm (0.78") min. dia. 114.3 mm (4.5") |
| Mounting | OD mount max. dia. 20 mm (0.78") min. dia. 114.3 mm (4.5") |
| Specific Shapes & Angles | I, V, X, J-bevel, other on request |
| Clamping | Manual wıth a key |
| Feed Stroke | 30 mm (1.181") |
| Gear Drive | 75 RPM to 90 RPM |
| Pneumatic Drive | 730 W, 6 bar (87 psi) 1400 l/min (49 cfm) use with lubricating filter and regulation valve. |
| Electric Drive | 110V (1500W) or 220V (1500W) |
Information provided is not contractual and subject to change without prior notice.
