SE90NG
| Mount | Beveling | Squaring | Counter-boring | Flush pipes | Weld Joint Removal | Coating Removal | Saddles | Surfacing |
| OD |
SE90NG
SE90NG Tube End Squaring and Beveling Machine
- is lightweighted and portable
- Performs perfect quality weld preps on pipes of all materials, e.g., carbon steel, stainless steel, exotic alloys such as Inconel, P91, Hastelloy, copper etc.
- cutting head can perform single (discrete) or simultaneous operations.
- easy-to-remove tool-holder plate can hold up to 4 tool blocks which enables replacing one holder-plate with another with pre-adjusted tools blocks
- clamps to the tubes and pipes by means of heavy clamping collet, providing chatterfree accurate finish.
| SE90NG -1002 | for Ø 0.393"-3.543" (10mm - 90mm) with pnuematic drive and automatic clamping |
| SE90NG -1004 | for Ø 0.393"-3.543" (10mm - 90mm) with integrated pneumatic automatic clamping and feed device |
| SE90NG -1020 | for Ø 0.393"-3.543" (10mm - 90mm) with electric drive 220V |
| SE90NG -1022 | for Ø 0.393"-3.543" (10mm - 90mm) with right angle electric drive 220V |
| SE90NG -1040 | for Ø 0.393"-3.543" (10mm - 90mm) with electric drive 110V |
| SE90NG -1006 | for Ø 0.393"-3.543" (10mm - 90mm) with automatic feed |
Technical Features
| machining capacity | standard: max. dia. 90 mm (3.543") min. dia. 10 mm (0.393") |
| mounting | OD mount max. dia. 90 mm (3.543") min. dia. 10 mm (0.393" |
| specific shapes & angles | I, V, J -bevel, other on request |
| clamping | manual |
| feed stroke | 30 mm (1.18") |
| gear drive | 75 rpm to 90 rpm |
| pneumatic drive | 1500 W, 6 bar (87 psi) 2800 l/min (100 cfm) |
| * use with lubricating filter and regulation valve. | |
| electric drive | 110V (1500W) or 220V (1500W) |
Information provided is not contractual and subject to change without prior notice.
