| Mount | Beveling | Cutting | Counterboring | Severing | Coating Removal | Squaring | Weld joint removal | Surfacing |
| OD |
TN0 12-24 OD Mount Pipe Cutting & Beveling Machine
- are high-speed cutting and beveling machines
- are specially designed for increasing productivity in fabrication shops
- can cut and bevel heavy wall pipes faster than any other machine
- with its optimized dimensions easy to integrate in production lines saving space in your fabrication shop
- with two sets of clamping screws located in the front and at rear adjusts concentricity with precision alignment and perfect squaring
| TNO _ FAB -24/36-1020 | for Ø 24"-36" (610mm - 914.4mm) with electric drive 220V |
| TNO _ FAB -24/36- 1030 | for Ø 24"-36" (610mm - 914.4mm) with electric drive 110V |
Technical Features
| machining capacity | standard: min. dia. 610 mm (24") max. dia. 914.4 mm (36") |
| mounting | OD mount min. dia. 610 mm (24") max. dia. 914.4 mm (36") |
| specific shapes & angles | I, V, X, J -bevel, other on request |
| clamping jack movement | 3.93" (100mm) |
| cutting carriage stroke | 3.93" (100mm) |
| effective stroke of cutting and beveling tool bits | 2.36" (60mm) |
| cutting head gear drive | minimum - maximum |
| 2.2 rpm - 11.9 rpm | |
| tool-holder plate feed speed | 0.0032"/rev 0.08 mm/rev - 0.0064"/rev 0.16 mm/rev |
| clamping jack normal pressure | 1450 psi 100 bars - 2900 psi 200 bars |
| electricity supply | 50-60 Hz / 400 V 3-phase + earth |
| installed capacity | 11 Kw |
| power consumption under full load | 19 A |
Information provided is not contractual and subject to change without prior notice.
