MS2300 Portable Facing and Boring Equipment for Flanges and Valves
MS Series
- offering the same functions with XP series with more powerful drive systems
- via powerful dual drive systems can perform core-drilling operations and machine strong materials such as duplex, super-duplex, P91, etc.
- deliver high-torques to machine seriously damaged surfaces or where deeper cutting passes are required
- are rapid and easy to configure
- design enables concentricity to be set independently from parallelism with precision oof 0.01 mm and surface finish of Ra 1.6
MA2300:
- is positioned and held in place by a column/arm system clamped on the outside of the part to be machined
| MS2300-1000 | with outside clamping : 39.4" - 95.551" (1000 - 2300mm) |
Technical Features
| Radial feed movement | 4" (100mm) |
| Automatic radial feed (2 speeds) | 0.0024" & 0.007"/rev (0.062mm & 0.186mm/rev) |
| Axial feed movement | 25" (32mm) |
| Axial feed | 0.003"/rev (0.08 mm/rev) |
| minimum facing | 40" (1000mm) |
| maximum facing | 90" (2300mm) |
| minimum clampinG | 50" (1250mm) |
| maximum clamping | 98" (250mm) |
| maximum drive motor power at 6 bars | 4 x 900 Watt |
| air supply pressure | 72 - 101 psi (5 - 7 bar max) |
| air flow | 176 cfm (5000 l/min) |
| weight,approximate | 3572lbs (1600kg) |
| clamping system | no |
Information provided is not contractual and subject to change without prior notice.
