MS600 Portable Facing and Boring Equipment for Flanges and Valves
MS Series
- offering the same functions with XP series with more powerful drive systems
- via powerful dual drive systems can perform core-drilling operations and machine strong materials such as duplex, super-duplex, P91, etc.
- deliver high-torques to machine seriously damaged surfaces or where deeper cutting passes are required
- are rapid and easy to configure
- design enables concentricity to be set independently from parallelism with precision oof 0.01 mm and surface finish of Ra 1.6
MA600:
- is equipped with an axial feed system for machining the bottoms of grooves of flanges and valves in confined areas
| MS600-1000 | with outside clamping : 0" - 23.6" (0 - 600mm) |
Technical Features
| Radial feed movement | 1.6" (40mm=) |
| Automatic radial feed (2 speeds) | 0.002" & 0.006"/rev (0.05mm & 0.15mm/rev) |
| Axial feed movement | 1.25" (32mm) |
| Axial feed | manual |
| minimum facing | 0" (0mm) |
| maximum facing | 23.6" (600mm) |
| minimum clamping | 11" (240mm) |
| maximum clamping | 23.7" (680mm) |
| maximum drive motor power at 6 bars | 2 x 740 Watt |
| air supply pressure | 72 - 101 psi (5 - 7 bar max) |
| air flow | 70.6 cfm (2000 l/min) |
| weight, approximate | 150lbs (68kg) |
| tiltable head (bores RTJ grooves, conical machnining) | Yes. Offered as an option |
Information provided is not contractual and subject to change without prior notice.
