OHSB-6-14

Mount	Beveling	Cutting	Counter-boring	Severing	Coating Removal	Facing	Weld Joint Removal	Surfacing
OD

is a mobile pipe beveling and facing machine,
with its OD clamping system and inline boring bar can machine pipe to depths up to 7.87” (200mm)
OD clamping enables operate to avoid deformations of the ID part of the pipes
with its easy handling and setup, can be transported and used as stationary units
driven by hydraulic motor can machine large wall thicknesses up to 2.362 inch (60mm)
can do facing, beveling with I, V, J, and X shapes or compound bevels
will perform repeatable high-quality surface finishes
are perfectly suitable for manual and automatic welding operations

Consult Us

Machining Capacity	Standard: max. dia. 355.6 mm (14") min. dia. 152.4 mm (6")
Mounting	OD mount OD max. 355.6 mm (14") OD min 152.4.8 mm (6"
Mechanical tool plate feed movement	200mm (7.874")
Gripping jaw movement	50mm (1.968")
Clamping jack movement tool plate	125mm (4.921")
	minimum maximum
Tool plate rotation drive supply	10 rpm 230 rpm
Advance speed of tool plate holders	0.002"/rev 0.05 mm/rev. 0.012"/rev 0.3 mm/rev.
Clamping jack supply pressure	- 110 bar (1595 psi)
Tool plate rotation drive supply pressure	- 80 bar (1160 psi)
Inside boring capacity	5" (127mm) 8.6" (218.44 mm)
Length of bore	0 6" (152.4 mm)