OHSB-C-6-14

Mount	Beveling	Cutting	Counter-boring	Severing	Coating Removal	Facing	Weld Joint Removal	Surfacing
OD

is a mobile pipe beveling and facing machine,
with its OD clamping system and inline boring bar can machine pipe to depths up to 7.87” (200mm)
OD clamping enables operate to avoid deformations of the ID part of the pipes
with its easy handling and setup, can be transported and used as stationary units
driven by hydraulic motor can machine large wall thicknesses up to 2.362 inch (60mm)
can do facing, beveling with I, V, J, and X shapes or compound bevels
will perform repeatable high-quality surface finishes
are perfectly suitable for manual and automatic welding operations
copying feature
is developed to perform bevel or compound bevels by copying
the carriage, mounted on the tool holder plate, performs beveling by means of a radially moving copying cam following ID of pipe
maximum wall thickness 2.626” (60mm) on a height of chamfer lower than 1.181” (30mm) with maximum angle of 37°.
minimum inside copying Ø 3.937” (100mm)
maximum inside copying Ø 10.039” (255mm)

Consult Us

OHSB-C-6-14

outside clamping beveling and facing -with copying- unit with

Machining Capacity	Standard: max. dia. 355.6 mm (14") min. dia. 152.4 mm (6")
Mounting	OD mount OD max. 355.6 mm (14") OD min 152.4.8 mm (6")
Mechanical tool plate feed movement	200mm (7.874")
gripping jaw movement	50mm (1.968")
Camping Jack Movement	125mm (4.921")
	Minimum - Maximum
Tool plate rotation supply speed	10 rpm 230 rpm
Advance speed of tool plate holders	0.002"/rev 0.05 mm/rev. 0.012"/rev 0.3 mm/rev.
Clamping jack supply pressure	- 110 bar (1595 psi)
Tool plate rotation drive supply pressure	- 80 bar (1160 psi)
Inside boring capacity	5" (127mm) 8.6" (218.44 mm)
Length of bore	0 6" (152.4 mm)