TTS-RD114
| Mount | Beveling | Cutting | Counterboring | Severing | Coating Removal | Squaring | Weld joint removal | Surfacing |
| OD |
TTS-RD114
TTS-RD114 Orbital Pipe Cutting & Beveling Machine
- is specifically designed for cutting and beveling pipes and tubes with small wall thicknesses
- special clamping system prevents eccentricity
- has the lowest clearance in TTS series
- has split-frame configuration
- parts of the machine is protected against cutting chips
- its collet clamping system enables quick set-up and easy concentricity adjustment
- can be remotely controlled in ionizing environments
| TTS RD 114-1000 | For Ø 2.374" - 4.55" (60.3mm - 114.3mm) with concentric clamping and pneumatic drive 730W |
Technical Features
| machining capacity | standard: min. dia. 60.3 mm (2.374") max. dia. 114.3 mm (4.5" |
| mounting | OD mount min. dia. 60.3 mm (2.374") max. dia. 114.3 mm (4.5" |
| clamping | manual with key |
| feed | automatic with clutch |
| cutting head gear drive | up to 30rpm off-load speed |
| * approximate rotation speed varies with air pressure and flow rate | |
| pneumatic drive | pneumatic |
| * use with lubricating filter and regulation valve. ** pneumatic is recommended drive type. Other drive types are available upon request |
Information provided is not contractual and subject to change without prior notice.
