TTS-RD88
| machining capacity | mounting | clamping | feed | cutting head gear drive | pneumatic drive | ||
| standard: min. dia. 21.3 mm (0.839") max. dia. 73 mm (2.874") | OD mount min. dia. 21.3 mm (0.839") max. dia. 73 mm (2.874") | manual with key | automatic with clutch | up to 30rpm off-load speed | * approximate rotation speed varies with air pressure and flow rate | pneumatic | * use with lubricating filter and regulation valve | ** pneumatic is recommended drive type. Other drive types are available upon request. |
TTS-RD88
TTS-RD88 Orbital Pipe Cutting & Beveling Machine
- is specifically designed for cutting and beveling pipes and tubes with small wall thicknesses
- special clamping system prevents eccentricity
- has the lowest clearance in TTS series
- has split-frame configuration
- parts of the machine is protected against cutting chips
- its collet clamping system enables quick set-up and easy concentricity adjustment
- can be remotely controlled in ionizing environments
| TTS RD88-1000 | For Ø 1.315" - 3.5" (33.4mm - 88.9mm) with concentric clamping and pneumatic drive 730W |
Technical Features
| machining capacity | standard: min. dia. 21.3 mm (0.839") max. dia. 73 mm (2.874") |
| mounting | OD mount min. dia. 21.3 mm (0.839") max. dia. 73 mm (2.874") |
| clamping | manual with key |
| feed | automatic with clutch |
| cutting head gear drive | up to 30rpm off-load speed |
| * approximate rotation speed varies with air pressure and flow rate | |
| pneumatic drive | pneumatic |
| * use with lubricating filter and regulation valve. ** pneumatic is recommended drive type. Other drive types are available upon request. |
Information provided is not contractual and subject to change without prior notice.
