TU200

are designed for use under extremely difficult and restrictive conditions
have separate and independent parallelism and concentricity adjustment mechanisms
through two-stage setup eliminates the need for re-adjustment of parallelism after concentricity has been adjusted
provides up to 0.01mm precision and up to 1.6 Ra surface finish
offer a combination of reduced size, weight, economic design, ultra-high precision surface machining and / or boring results

Consult Us

TU200-1000

with pnuematic motor - facing Ø 0" - 7.87" (0-200mm)

Facing Ø	0" - 7.87" (0 - 200mm)
Clamping Ø	3.9" - 11.4" (100mm
Axial feed	2.8" (70mm- 290mm)
Radial feed	1.2" (30mm)
Maximum drive motor power (at 6 bars)	120 Watt
Air supply pressure	87 - 101 psi (5 - 7 bar)
Air flow required	12.3 cfm (350 l/min)
Weight	33lbs (15kg)
Optional clamping	use FC 300 chain system for secure clamping outside of the part to be machined