TTS-NG127

Mount	Beveling	Cutting	Counterboring	Severing	Coating Removal	Squaring	Weld joint removal	Surfacing
OD

is specifically designed for usage for piping and tubes tight spaces
with its reduced weight and optimized dimensions, is easy-tomount, mobile, and powerful
has split-frame configuration, opening in two half-shells that manually clamps onto pipe via four individually adjustable claws
versatile cutting head that fits up to four cutting bits. As such, four different machining operations can be carried out simultaneously or individually

Consult Us

TTS NG127-1000	For Ø 2.374"-5" (60.3mm - 114.3mm) with pnuematic drive
TTS NG127-1020	For Ø 2.374"-5" (60.3mm - 114.3mm) with right angle electric drive, 220V
TTS NG127-1040	For Ø 2.374"-5" (60.3mm - 114.3mm) with right angle electric drive, 110V
TTS-NG127 ØA	5.07" 129mm
TTS-NG127 B	8.07" 205mm
TTS-NG127 C	5.89" 149.5mm
TTS-NG127 D	2.91" 74mm
TTS-NG127 E	3.36" 85.5mm
TTS-NG127 E'	6.14" 156mm
TTS-NG127 F	4.86" 123.5mm
TTS-NG127 F'	7.63" 194mm
TTS-NG127 G	5.16" 131mm
TTS-NG127 H	8.86" 225mm
TTS-NG127 H'	16.45" 418mm
TTS-NG127 ØJ	10.69" 271.5mm
TTS-NG127 K	9.96" 253mm
TTS-NG127 Weight*	8kg 17.6lbs
TTS NG 6000-E J A	Enveloping jaws aluminum (please specify the machine)
TTS NG 6000-E J S S	Enveloping jaws stainless (please specify the machine)
TTS NG 6000-E J C S	Enveloping jaws steel (please specify the machine)
C effretC D E -5000	Pneumatic remote control unit
TTS NG -4400	Pneumatic clutch sub-assembly

machining capacity	standard: max. dia. 60.3 mm (2.374") min. dia. 127 mm (5")
mounting	OD mount max. dia. 60.3 mm (2.374") min. dia. 127 mm (5"
specific shapes & angles	I, V, X, J -bevel, other on request
clamping	manual with key
feed	automatic with clutch
cutting head gear drive	no-load speed 316* nominal speed 155 rpm*
	* approximate rotation speed varies with air pressure and flow rate
pneumatic drive	1.47 kW, 6 bar (87 psi) 1400 l/min (50 cfm)
	* use with lubricating filter and regulation valve.
electric drive	110V (1500W) or 220V (1500W)