TTS-NG42
| Mount | Beveling | Cutting | Counterboring | Severing | Coating Removal | Squaring | Weld joint removal | Surfacing |
| OD |
TTS-NG42
TTS-NG42 Clamshell Cutting & Beveling Machine-pipe Cold Cutting Machine
- is specifically designed for usage for piping and tubes tight spaces
- with its reduced weight and optimized dimensions, is easy-tomount, mobile, and powerful
- has split-frame configuration, opening in two half-shells that manually clamps onto pipe via four individually adjustable claws
- versatile cutting head that fits up to four cutting bits. As such, four different machining operations can be carried out simultaneously or individually
| TTS NG42-1000 | For Ø 0.405"-1.661" (10.3mm - 42.2mm) with pnuematic drive |
| TTS NG42-1020 | For Ø 0.405"-1.661" (10.3mm - 42.2mm) with right angle electric drive, 220V |
| TTS NG42-1040 | For Ø 0.405"-1.661" (10.3mm - 42.2mm) with right angle electric drive, 110V |
| TTS-NG42 ØA | 1.77' 45.0mm |
| TTS-NG42 B | 4.76" 121mm |
| TTS-NG42 C | 4.05" 103mm |
| TTS-NG42 D | 2.91" 74mm |
| TTS-NG42 E | 3.36" 85.5mm |
| TTS-NG42 E' | 6.14" 156mm |
| TTS-NG42 F | 4.86" 123.5mm |
| TTS-NG42 F' | 7.63" 194mm |
| TTS-NG42 G | 3.5" 89mm |
| TTS-NG42 H | 7.22" 183.5mm |
| TTS-NG42 H' | 14.8" 376mm |
| TTS-NG42 ØJ | 7.36" 187mm |
| TTS-NG42 K | 6.65" 169mm |
| TTS-NG42 Weight* | 5kg 11lbs |
| * weights of machines equipped with motors and tool carriages | |
| TTS NG6000-E J A | Enveloping jaws aluminum (please specify the machine) |
| TTS NG6000-E J S S | Enveloping jaws stainless (please specify the machine) |
| TTS NG6000-E J C S | Enveloping jaws steel (please specify the machine) |
| C effretC D E -5000 | Pneumatic remote control unit |
| TTS NG -4400 | Pneumatic clutch sub-assembly |
Technical Features
| machining capacity | standard: max. dia. 10.3 mm (0.405") min. dia. 42.2 mm (1.661") |
| mounting | OD mount max. dia. 10.3 mm (0.405") min. dia. 42.2 mm (1.661") |
| specific shapes & angles | I, V, X, J -bevel, other on request |
| clamping | manual with key |
| feed | automatic with clutch |
| cutting head gear drive | no-load speed 316* nominal speed 155 rpm* |
| * approximate rotation speed varies with air pressure and flow rate | |
| pneumatic drive | 1.47 kW, 6 bar (87 psi) 1400 l/min (50 cfm) |
| * use with lubricating filter and regulation valve | |
| electric drive | 110V (1500W) or 220V (1500W) |
Information provided is not contractual and subject to change without prior notice.
