XP1200

Have a very compact design for use in extremely confined spaces
Have a very large range of radial movement and are ideal for facing operations on valves and flanges
Their inclinable head option allows machining RTJ grooves
Have separate and independent parallelism and concentricity adjustment mechanisms
Provide up to 0.01mm precision and up to 1.6 Ra surface finish
Can be set up easily even in the tightest spaces, and in all positions, by one operator
Clamp outside of the part to be machined via a clamp/arm system that fixes and keeps the machine strictly in the adjusted position

can do the facing of all flange types
is more compact than TU series due to its machining head that only do radial movement where boring is not required
via 4 removable arm adjustable over 360° can be mounted on dowel pin bores of any type of flange

Consult Us

XP1200-1000	with pnuematic motor for facing 0.393" - 47.2" (10mm - 1200mm)
XP1200E-1020	0 with electric motor for facing 0.393" - 35.433" (10mm - 900mm)
XP1200HY-1060	with hydraulic motor for facing 0.393" - 35.433" (10mm - 900mm)

Radial movement Automatic radial feed (2 speeds)	4" (100mm) 0.062 & 0.186 min/rev
minimum facing Ø	0.393" (10mm)
maximum facing Ø	47.2" (1200mm)
minimum clamping Ø	20" (500mm)
maximum clamping Ø	55" (140mm)
maximum drive motor power at 6 bar	2000 Watt
drive motor speed under no-load conditions	45 rev/min
air supply pressure	72 - 101 psi (5 - 7 bar max)
air flow	106 cfm (3000 l/min)
weight, approximate	e 529lbs (240kg)
clamping system	FSTG 2050 (option)
tiltable head (bores RTJ grooves, conical machnining)	Yes. Offered as an option