XP Series

XP1800NG Portable Facing and Boring Equipment for Flanges and Valves

  • Have a very compact design for use in extremely confined spaces
  • Have a very large range of radial movement and are ideal for facing operations on valves and flanges
  • Their inclinable head option allows machining RTJ grooves
  • Have separate and independent parallelism and concentricity adjustment mechanisms
  • Provide up to 0.01mm precision and up to 1.6 Ra surface finish
  • Can be set up easily even in the tightest spaces, and in all positions, by one operator
  • Clamp outside of the part to be machined via a clamp/arm system that fixes and keeps the machine strictly in the adjusted position

XP1800NG:

  • is designed on the same principles as the XP1200, with radial movement only machining head
  • its four clamping arms have been reinforced to maintain rigidity of the unit even when machining diameters up to 70.8” (1800mm)
XP1800NG-1000 with pnuematic motor for facing 0.393" - 70.8" (10mm - 1800mm)
XP1800NGE-1020 with electric motor for facing facing : 0.393" - 70.8" (10mm - 1800mm)
XP1800NGHY-1060 with hydraulic motor for facing facing : 0.393" - 70.8" (10mm - 1800mm)

Technical Features

Radial movement 8" (200mm)
Automatic radial feed (2 speeds) variable and independent
minimum facing Ø 0.393" (10mm)
maximum facing Ø 70.8" (1800mm)
minimum clamping Ø 32.9" (836mm)
maximum clamping Ø 83" (2110mm)
maximum drive motor power at 6 bars 3000 Watt
drive motor speed under no-load conditions 21 rev/min
air supply pressure 72 - 101 psi (5 - 7 bar max)
air flow 141 cfm (4000 l/min)
weight, approximate 1698lbs (770kg
clamping system FSTG 2050 (option)
tiltable head (bores RTJ grooves, conical machnining) Yes. Offered as an option

Information provided is not contractual and subject to change without prior notice.

Protem ProductPortfolio Serco Product Portfolio Pipe Size Chart Protem USA Protem France