XP2000NG | Ege Machinery

Have a very compact design for use in extremely confined spaces
Have a very large range of radial movement and are ideal for facing operations on valves and flanges
Their inclinable head option allows machining RTJ grooves
Have separate and independent parallelism and concentricity adjustment mechanisms
Provide up to 0.01mm precision and up to 1.6 Ra surface finish
Can be set up easily even in the tightest spaces, and in all positions, by one operator
Clamp outside of the part to be machined via a clamp/arm system that fixes and keeps the machine strictly in the adjusted position

like XP1200 and XP1800NG, is equipped with radial-feed head and four clamping arms
extends the machining range without compromising from rigidity

Consult Us

XP2000NG-1000	with pnuematic motor for facing Ø 0.393" - 78.74" (10mm - 2000mm)
XP2000NGE-1020	with electric motor for facing Ø 0.393" - 78.74" 0 with electric motor for facing 0.393" - 78.74" (10mm - 2000mm)
XP2000NGHY-1060	with hydraulic motor for facing Ø 0.393" - 78.74" (10mm - 2000mm

Radial movement	8" (200mm)
Automatic radial feed (2 speeds)	variable and independent
minimum facing Ø	0.393" (10mm)
maximum facing Ø	78.74" (2000mm)
minimum clamping Ø	32.9" (836mm)
maximum clamping Ø	91" (2310mm)
maximum drive motor power at 6 bars	3100 Watt
drive motor speed under no-load conditions	21 rev/min
air supply pressure	72 - 101 psi (5 - 7 bar max)
air flow	141 cfm (4000 l/min)
weight, approximate	1720lbs (780kg)
clamping system	FSTG 2500 (option)
tiltable head (bores RTJ grooves, conical machnining)	Yes. Offered as an option