XP400NG

Have a very compact design for use in extremely confined spaces
Have a very large range of radial movement and are ideal for facing operations on valves and flanges
Their inclinable head option allows machining RTJ grooves
Have separate and independent parallelism and concentricity adjustment mechanisms
Provide up to 0.01mm precision and up to 1.6 Ra surface finish
Can be set up easily even in the tightest spaces, and in all positions, by one operator
Clamp outside of the part to be machined via a clamp/arm system that fixes and keeps the machine strictly in the adjusted position

Consult Us

XP400NG-1000	0 with pnuematic motor for facing 0.393" - 15.7" (10mm - 400mm)
XP400NGE-1020	with electric motor for facing 0.393" - 15.7" (10mm - 400mm)
XP400NGHY-1060	0 with hydraulic motor for facing 0.393" - 15.7" (10mm - 400mm)

Radial movement 1	1.2" (30mm)
Radial movement Radial feed	manual
minimum facing	0.393" (10mm)
maximum facing	15.7" (400mm)
minimum clamping	7.086" (180mm)
maximum clamping	18.11" (460mm)
maximum drive motor power at 6 bars	800 Watt
drive motor speed under no-load conditions	58 rev/min
air supply pressur	50.76 psi (3.5 bar max)
air flow	53 cfm (1500 l/min)
weight, approximate	44lbs (20kg)
clamping system	FSTG (option)
tiltable head (bores RTJ grooves, conical machnining)	Yes. Offered as an option