TU1400
TU Series:
TU1400 Portable Facing and Boring Equipment for Flanges and Valves
- are designed for use under extremely difficult and restrictive conditions
- have separate and independent parallelism and concentricity adjustment mechanisms
- through two-stage setup eliminates the need for re-adjustment of parallelism after concentricity has been adjusted
- provides up to 0.01mm precision and up to 1.6 Ra surface finish
- offer a combination of reduced size, weight, economic design, ultra-high precision surface machining and / or boring results
TU1400
- is the largest machine within TU standard range
- comes with specifically designed arms to increase its capacity
- its robust design enables machining valve seats down to depths of 19.7” (500mm).
| TU1400-1000 | with pnuematic motor - facing Ø 0" - 55.1" (0-1400mm ) |
| TU1400E-1020 | with electric motor - facing Ø - facing Ø 0" - 55.1" (0-1400mm) |
| TU1400HY-1060 | with electric motor - facing Ø - facing Ø 0" - 55.1" (0-1400mm) |
| TU1800 | 0" - 70.8" (0mm - 1800mm) |
| TU2000 | 0" - 78.7" (0mm - 2000mm) |
| TU2200 | 0" - 86.6" (0mm - 2200mm) |
| TU2400 | 0" - 94.5" (0mm - 2400mm) |
| TU2800 | 0" - 110.2" (0mm - 2800mm) |
| TU3000 | 0" - 118.1" (0mm - 3000mm) |
| TU3200 | 0" - 125.9" (0mm - 3200mm) |
| * TU models for diameters larger than those specified in the catalogue are available upon request |
Technical Features
| Facing Ø | 0" - 55.1" (0 - 1400mm) |
| Clamping Ø | 11" - 63.7" (280mm) |
| Axial feed | 5.9" (150mm) |
| Radial feed | 3.9" (100mm) |
| Maximum drive motor power (at 6 bars) | 570 Watt |
| Axial downfeed power drive motor | 120 Watt |
| Air supply pressure | 87 - 101 psi (5 - 7 bar) |
| Air flow required | 52.9 cfm (1500 l/min) |
| Weight | 390lbs (177kg) |
| Optional clamping | use FC 1150 chain system for secure clamping outside of the part to be machined |
Information provided is not contractual and subject to change without prior notice.
