US30CH
| Mount | Beveling | Squaring | Counter-boring | Flush pipes | Weld Joint Removal | Coating Removal | Saddles | Surfacing |
| ID |
US30CH
Portable Beveling and Waterwall Machine for boiler tubes
- is a durable, reliable, versatile and light weight beveling machine
- its standard tool-holder plate will mount multiple tool bits, enabling up to four simultaneous machining operations
- Its tool bits can be changed and adjusted very quickly
- has self-driven torque-system and integral drive motor
- will perform repeatable high-quality weld preparations on all types of materials including carbon steel, chrome, stainless steel, duplex, super duplex, inconel, P91, aluminum, and virtually all alloys.
| US30CH | 1000pipe beveling machine with pnuematic drive |
| US30CH | 1010pipe beveling machine with pnuematic drive.New generation for boilers with 11bis - longer mandrel |
| US30CH | 1012pipe beveling machine with pnuematic drive.New generation for boilers fitted with extended tool-holder plate |
| US30CH | 1022pipe beveling machine with electrical driveNew generation for boilers with 11bis - longer mandrel |
| US30CH | 1024pipe facing machine with electrical driveMachine fitted with extended tool-holder plate. Extended range. |
| US30CH | 1026pipe beveling machine with electrical right angle drive. Machine fitted with extended tool-holder plate. |
| US30CH | 1030pipe beveling machine with electrical drive (220V, 1500W). New generation for boilers |
| US30CH | 1040pipe beveling machine with electrical drive (110V, 1500W). New generation for boilers |
| US30CH | 1042pipe beveling machine with electrical drive (110V, 1500W). New generation for boilers with 11bis, longer mandrel |
| US30CH | 1044pipe beveling machine with electrical drive (110V, 1500W. Machine fitted with extended tool-holder plate. Extended range. |
Technical Features
| Machining Capacity | standard: max. dia. 114 mm (4.448") min. dia. 32 mm (1.259") extended: max. dia. 168.3 mm (6.626") min. dia. 32 mm (1.259") |
| Mounting | ID mount ID min. 32 mm (1.259") OD max. 168.3 mm (6.626") |
| Specific Shapes & Angles Clamping | facing 90°, bevel 30°, 37°30, 45°, counter-bore, J- bevel, other on request |
| Feed Stroke | 35 mm (1.378") |
| Expansion | 9 mm (0.354") |
| Cutting Head Gear Drive Speed | max 30 rpm |
| Pneumatic Drive | 730 W, 6 bar (87 psi) 1400 l/min (49 cfm) * use with lubricating filter and automation valve. |
| Electric Drive | 110 V (1500 W) or, 220 V (1050 W) |
| Clamping | manual with key |
Information provided is not contractual and subject to change without prior notice.
