| Mount | Beveling | Squaring | Counterboring | Flush pipes | Weld Joint Removal | Coating Removal | Saddles | Surfacing |
| ID |
US80 Pipe Beveling Machine
- its standard tool-holder plate will mount multiple tool bits, enabling up to four simultaneous machining operations
- can do 30°, 37°30, 45° with or without land, J-bevels, compound bevels
- its tool bits can be changed and adjusted very quickly
- will perform repeatable high-quality weld preparations on all types of materials including carbon steel, chrome, stainless steel, duplex, super duplex, inconel, P91, aluminum, copper, and virtually all alloys.
| US80-1000 | heavy-duty pipe facing machine with dual pnuematic drive |
| US80-1002 | heavy-duty pipe facing machine with pnuematic drive |
| US80-1040 | heavy-duty pipe facing machine with 400 V electric drive |
| US80-1060 | heavy-duty pipe facing machine with dual hydraulic drive and regulation valve |
| US80-1062 | heavy-duty pipe facing machine with hydraulic drive |
| US80-1064 | heavy-duty pipe facing machine with single hydraulic drive and regulation valve |
| US80-1066 | heavy-duty pipe facing machine with single hydraulic drive |
| US80-1080 | heavy-duty pipe facing machine with single brushless electric drive - three-phase motorization. * please indicate the required voltage for your application |
| US80DSB-1000 | heavy-duty pipe facing machine with dual pnuematic drive, regulation valve and dual bearing for higher precision |
| US80DSB-1060 | heavy-duty pipe facing machine with dual hydraulic drive, regulation valve and dual bearing for higher precision |
Technical Features
| machining capacity | standard: max. dia. 355 mm (13.976") min. dia. 80 mm (3.149") extended: max. dia. 406 mm (16") min. dia. 80 mm (3.149") |
| mounting | ID mount ID min. 80 mm (3.149") OD max. 406.4 mm (16") |
| specific shapes & angles | facing 90°, bevel 30°, 37°30, 45°, counter-bore, J- bevel, other on request |
| clamping | manual with a key |
| feed stroke | 60 mm (2.362") |
| expansion | 25 mm (0.984") |
| cutting head gear drive speed | 16 rpm *, off-load 11 rpm *, nominal * may vary depending on flow rate and pressure |
| single pneumatic drive | 1.47 kW, 6 bar (87 psi) 1800 l/min (63 cfm) |
| double pneumatic drive | 2 x 1.47 kW, 6 bar (87 psi) 2 x 1800 l/min (63 cfm) |
| * use with lubricating filter and automation valve. | |
| electric drive | 400 V |
Information provided is not contractual and subject to change without prior notice.
